Keysight Technologies N9020B Installation Note page 50
Mxa signal analyzer
Hide thumbs
Also See for N9020B:
- Installation note (38 pages) ,
- Installation kit (10 pages) ,
- Security features and document of volatility (58 pages)
Table of Contents
Advertisement
Installation Procedure
7. The FPGA Programming Utility will start and a window as shown in
Figure 39
FPGA Programming Utility
8. To program the FPGA code, press 1 on the numeric keypad and press Enter. You will need to
confirm this selection by pressing 1 and Enter one more time.
9. The programming of the FPGA code could take several minutes to complete. Once it has
finished the instrument will reboot itself to use the new code and this process will then be
completed.
50
Figure 39
will appear.
Installation Note N9020-90289
Advertisement
Table of Contents
