Keysight Technologies N9020B Installation Note page 23
Mxa signal analyzer
Hide thumbs
Also See for N9020B:
- Installation note (38 pages) ,
- Installation kit (10 pages) ,
- Security features and document of volatility (58 pages)
Table of Contents
Advertisement
Removing Cables
1. Refer to
Figure
11. Remove the wire cable hold down on the right side of the chassis to free the
gray coax cables going to the A15 Reference Assembly.
2. Remove cable ties from bundle of gray coax cables.
Figure 11
Cables Under Cable Hold Down
Installation Note N9020-90289
Perform this procedure only if the analyzer currently has Option DP2 and/or MPB installed. In this
situation, there are cables which must be removed in order to install other cables later in this
installation procedure.
Installation Procedure
23
Advertisement
Table of Contents
