Keysight Technologies N9020B Installation Note page 20
Mxa signal analyzer
Hide thumbs
Also See for N9020B:
- Installation note (38 pages) ,
- Installation kit (10 pages) ,
- Security features and document of volatility (58 pages)
Table of Contents
Advertisement
Installation Procedure
Rear Panel Removal
1. Refer to
Figure
8. Using the T-10 driver, remove the screws (2) attaching the rear panel (1) to
the chassis. The rear panel can now be removed.
2. Use a 9/16-inch socket wrench to remove the nut securing the EXT REF IN connector from the
rear panel.
Figure 8
Rear Panel Removal
3. Instruments with Option CR3 or CRP will have an additional cable W39 that is attached to the
rear panel. Remove W39 using either a 5/16" nut driver or a 5/16" open-end wrench.
4. The rear panel can now be removed.
20
Installation Note N9020-90289
Advertisement
Table of Contents
