Keysight Technologies N9020B Installation Note page 16
Mxa signal analyzer
Hide thumbs
Also See for N9020B:
- Installation note (38 pages) ,
- Installation kit (10 pages) ,
- Security features and document of volatility (58 pages)
Table of Contents
Advertisement
Installation Procedure
Portable Instrument (Option PRC)
1. Disconnect the instrument from ac power.
2. Refer to
Figure
4. Using the T-20 driver, remove the four screws (two on each side) (1) that
hold the bail handle (2) to the front frame.
Figure 4
Bail Handle Removal
3. Using the T-20 driver, remove the four screws (two on each side) (6) that hold the strap
handle plugs (5) in place.
16
Make sure any adapters on the front panel are removed.
Installation Note N9020-90289
Advertisement
Table of Contents
