Windows 95, 98, Me; Disabling Pppoe Client Software; Macintosh Os 8.5, 9.X - 3Com OfficeConnect 3CR856-95 User Manual

Figure 7
8 Restart your computer.

Windows 95, 98, ME

1 From the Windows Start Menu, select Settings > Control Panel.
2 Double click on Network. Select the TCP/IP item for your network
card and click on Properties.
In the TCP/IP dialog, select the IP Address tab, and ensure that
3
Obtain IP address automatically is selected. Click OK.
Restart your computer.
4

Macintosh OS 8.5, 9.x

If you are using a Macintosh computer, use the following
procedure to change your TCP/IP settings:
1 From the desktop, select Apple Menu, Control Panels, and TCP/IP.
2 In the TCP/IP control panel, set Connect Via: to "Ethernet."
In the TCP/IP control panel, set Configure: to "Using DHCP
3
Server."
Close the TCP/IP dialog box, and save your changes.
4
Restart your computer.
5

Disabling PPPoE Client Software

If you have PPPoE client software installed on your computer, you
will need to disable it. To do this:
1 From the Windows Start menu, select Settings > Control Panel.
2 Double click on Internet Options.
Select the Connections Tab. A screen similar to
3
be displayed.
20
Figure 8 should