3Com OfficeConnect 3CR856-95 User Manual page 28

If your ISP does not require one of the fields to be filled in then
leave it blank. This indicates to the Gateway that there is no
server.
If your ISP requires you to supply a host name enter it in the Host
2
Name box, otherwise leave the box blank.
Click Next to continue to the Clone MAC Address screen, shown
3
in Figure 19 below.
Figure 19 Clone MAC Address Screen
If your ISP requires an assigned MAC address, select the
4
appropriate radio button:
Yes, please clone the MAC address from the PC I'm currently
I
using if the computer you are using now is the one that was
previously connected directly to the cable or DSL modem.
Yes, I would like to enter a MAC address manually and
I
manually enter the values for a MAC address if the computer
you are using now was not previously connected directly to
the cable or DSL modem.
Otherwise click No.
Click Next to continue
Continue at "Choosing your LAN Settings" on page
Static IP Mode
To setup the Gateway for use with a static IP address connection,
use the following procedure:
Figure 20 Static IP Mode Screen
Enter your IP Address in the IP Address text box.
1
Enter your subnet mask in the Subnet Mask text box.
2
28
29.