Pc Privileges - 3Com OfficeConnect 3CR856-95 User Manual

PC Privileges

Select PC Privileges to display the PC Privileges setup screen. This
is shown in Figure 40 below.
The Gateway's DHCP server has been enhanced to support PC
Privileges. If you want to use DHCP and control access to the
Internet on a user by user basis then you must either use the
Gateway's DHCP server or static addressing.
Figure 40 PC Privileges Screen
Access from the local network to the Internet can be controlled
on a PC-by-PC basis. In the default configuration the Gateway
will allow all connected PCs unlimited access to the Internet.
PC Privileges allows you to assign different access rights for
different computers on your network, restricting this access and
controlling your users' access to outside resources.
To use access control for all computers:
1 Click the Control PC Access to the Internet radio button.
2 Click on All PCs to setup the access rights for all computers
connected to the Gateway.
Check the box of a service to authorise it. Clear the box to deny
3
the service. See Figure
Figure 41 All PCs Setup Screen
4 Either:
Enter the additional services that you wish to allow in the
I
except (specify ports) box and set the drop down box to
Allow.
Enter the services that you wish to deny in the except
I
(specify ports) box and set the drop down box to Deny.
45
41.