Table of Contents
Advertisement
5
Software Installation
Configuring Printer
Properties
Windows 98 and 95
P
S
RINT
ERVER
The Home Network Gateway also can function as a network print server for
computers running Windows 95, 98, and NT 4.0, and UNIX based platforms.
Using the gateway as a print server allows you to share the printer connected to
the gateway among all of the computers on your home network.
Before using the print server function, you must install the software on one of the
computers of your home network. To install the software:
1 Insert the installation CD into the CD-ROM drive.
The installation screen will appear. If not, run the file install.exe from the CD.
2 Click Install.
Wait for the Welcome dialog box to appear, and then click Next.
3 Select the destination folder, and click Next.
The setup program will begin to install the programs into the destination folder.
4 When the next dialog box appears, click Finish.
5 In the next dialog box, select Restart the computer and then click OK to reboot
your computer.
After you have finished the software installation, you must configure the printer
properties on the computer.
1 From the Start menu, select Settings, and then Printers.
2 Locate the icon that corresponds to the printer connected to the gateway.
Right-click the icon, and then select Properties.
3 Select Details, and then select PRTmate: (All-in-1) from the Print To the following
port: list.
Be sure that the printer driver is the correct driver for your the printer.
4 Click Port Settings. Enter the IP address of the gateway, and then click OK.
5 Make sure that all settings mentioned above are correct, and then click OK.
Advertisement
Table of Contents
