Pppoe; Dhcp; Static; Powering Up The Gateway - 3Com OfficeConnect 3CR856-95 User Manual

PPPoE

If your ISP allocates IP information dynamically over PPPoE, you
need a User Name and Password:
PPPoE User Name:
PPPoE Password:
PPPoE Service Name:
Host Name;
Only enter a PPPoE Service Name or Host Name if your ISP
requires you to do this. Do not enter anything if your ISP does
not require a service name

DHCP

If your ISP allocates IP information dynamically using DHCP they
may require you to use keep a fixed MAC Address and Host
Name for security purposes.
MAC Address:
Host Name:
____________________
____________________
____________________
____________________
____________________
____________________

Static

If your ISP allocates fixed or static IP information, you need the
following information:
IP Address:
Subnet Mask:
Default Gateway Address:
Primary DNS Address

Powering Up the Gateway

Plug the power adapter into the power adapter socket located
1
on the back panel of the Gateway (refer to
socket" on page 13).
Plug the power adapter into a standard electrical wall socket.
2

Connecting the Cable/DSL Secure Gateway

The first step for installing your Cable/DSL Secure Gateway is to
physically connect it to a cable or DSL modem in order to be able
to access the Internet.
16
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
"Power Adapter