14.0 OPERATION AND INSPECTION CHECKLIST
BEFORE EACH USE, the Extend-A-Gun must be inspected to this checklist:
1. There is no obvious damage such as missing, broken or loose parts, damaged labels, etc.
2. All controls move freely and operate properly.
3. The Extend-A-Gun operates freely without binding throughout its range of travel.
4. There are no leaks when the Extend-A-Gun is flowing water.
BEFORE BEING PLACED BACK IN SERVICE, the Extend-A-Gun must be inspected to this list:
1. All controls and adjustments are operational.
2. There are no broken or missing parts.
3. There is no damage to the Extend-A-Gun or attached monitor that could impair safe operation (e.g. detents, cracks, corrosion, or
other defects).
4. The waterway is clear of obstructions.
5. The Extend-A-Gun is clean and markings are legible.
WARNING
TASK FORCE TIPS LLC
MADE IN USA · tft.com
©Copyright Task Force Tips LLC 2004-2020
Equipment failing any part of the checklist is unsafe for use and must have the problem corrected
before use or being placed back into service. Operating equipment that has failed the checklist is a
misuse of this equipment.
3701 Innovation Way, Valparaiso, IN 46383-9327 USA
800-348-2686 · 219-462-6161 · Fax 219-464-7155
28
LIX-530 March 17, 2020 Rev15
Need help?
Do you have a question about the Extend-A-Gun RC3 and is the answer not in the manual?
Questions and answers