Seat Leon 5D Owner's Manual page 77

on the case, even an audible warning
›››
page 87. The representation of the mes-
sages and symbols may vary depending on
the version of the instrument panel.
Existing faults can also be checked manually.
To do so, open the menu Vehicle info
›››
page 92.
Priority 1 warning (red)
The symbol lights up or flashes (in part ac-
companied by audible warnings).
driving! Danger! Check the fault and elimi-
nate the cause. If necessary, seek professio-
nal assistance.
Priority 2 warning (yellow)
The symbol lights up or flashes (in part ac-
companied by audible warnings). Operating
faults or the lack of operating fluids can
cause damage to the vehicle or a fault.
Check the faulty function as soon as possible.
If necessary, seek professional assistance.
Information message
It provides information about processes in the
vehicle.
1) Vehicles with analogue instrument panel.
Instruments and warning/control lamps
Accessing warnings and information
In the infotainment system, press
●
hicle info > Vehicle status > Alerts.
Or: 1) Access the Vehicle menu, then press
●
the button on the multifunction steering

wheel or the

screen wiper lever and select Warning mes-
sage memories.
Stop

Driver alert system (break recom-
mendation)*
On the instrument panel display: driver
Fig. 62
alert system symbol.
The Fatigue detection informs the driver when
their driving behaviour shows signs of fatigue.
Function and operation
> Ve- Fatigue detection determines the driving be-
 
haviour of the driver when starting a journey,
making a calculation of tiredness. This is con-
stantly compared with the current driving be-
haviour. If the system detects that the driver is
button on the wind-
tired, an audible warning is given with a
sound and an optic warning is shown with a
symbol and complementary message on the
instrument panel display
sage on the instrument panel display is
shown for approximately 5 seconds, and de-
pending on the case, is repeated. The system
stores the last message displayed.
The message on the instrument panel display
can be switched off by pressing the
button on the windscreen wiper lever or the
button
›››
The message can be recalled to the instru-
ment panel display using the multifunction
display
Conditions of operation
Driving behaviour is only calculated on
speeds above about 65 km/h (40 mph) up to
around 200 km/h (125 mph).
›››
Fig. 62. The mes-
on the multi function steering wheel

page 85.
›››
page 73.

»
75