Seat Leon 5D Owner's Manual page 190

Disconnecting
On the Android Auto™ mode, press the Re-
●
turn to SEAT icon to access the Full Link main
menu.
Press to interrupt the active connection.
●

Special characteristics
During an active Android Auto™ connection,
the following characteristics are applicable:
An active Android Auto™ device can be
●
connected at the same time via Bluetooth®
(HFP profile) with the infotainment system.
It is possible to use the phone's functions
●
through Android Auto™. If the Android Auto™
device is connected at the same time via
Bluetooth® with the infotainment system, the
telephone function of the infotainment can
also be used.
An active Android Auto™ device cannot be
●
used as a multimedia device in the Media
main menu.
It is not possible to use the built-in naviga-
●
tion system and the Android Auto™ navigation
system at the same time. The last route star-
ted interrupts the one that was previously ac-
tive.
On the instrument panel screen you can
●
view data from the Telephone mode.
The instrument panel screen does not dis-
●
play any indication to turn or the Media
mode.
188
Infotainment system
With the multifunction steering wheel you
●
can accept or reject incoming calls, as well
as end an ongoing telephone conversation.
voice control
Press briefly to start voice control using
●

the infotainment system.
Press this button for a long time to start
●
voice control on the connected smartphone.
Note
The availability of technologies depends
●
on the country and may vary.
You will find information about technical
●
requirements, compatible mobile phone
devices, certified applications and their
availability on the SEAT (www.seat.com)
and Android Auto™ websites, or at SEAT
dealerships.
MirrorLink®
Requirements for MirrorLink®
In order to use MirrorLink™, the following re-
quirements must be met:
The mobile device must be compatible with
●
MirrorLink™.
The mobile phone device must be connec-
●
ted to the infotainment system via a USB con-
nection that is suitable for data transmission.
The USB cable used must be an original ca-
●
ble provided by the mobile phone device
manufacturer.
Depending on the mobile tphone device
●
used, a Car-Mode application that is suitable
for using MirrorLink® must be installed.
Establish connection
When you first connect a mobile phone de-
vice, follow the instructions on the infotain-
ment system screen and on the mobile phone
device.
The requirements must be met to use Mirror-
Link™.
Launch MirrorLink®:
Press HOME > Full Link to access the Full
●
Link main menu.
OR: press APP to access the Full Link main
●
menu.
Press to establish the connection with the
●
mobile phone device.
Disconnecting
In the MirrorLink® mode, press the APP icon
●
to access the Full Link main menu.
OR: press to access the MirrorLink® main
● 
menu.
Press to interrupt the active connection.
●
