Seat Leon 5D Owner's Manual page 311

Charging process display
3 Valid for: hybrid vehicles
Behind the cover of the battery charg-
Fig. 211
ing socket: charging process display
High-voltage battery
On the inside of the cover of the bat-
Fig. 212
tery charging socket: sticker with information
on the charging process display.
An LED light on the charging socket
›››
Fig. 211 (arrow) shows the status of the
charging process.
A sticker on the battery charging cover pro-
vides information on the meaning of the LEDs
›››
Fig. 212.
Charging process displays:
›››
Green LED Fig. 212:
Always on: Charge completed success-
1
fully.
Turn signals: The high-voltage battery is
2
charging.
Short flashes: Deferred charge active.
3
The charging process has not yet started.
›››
Yellow LED Fig. 212:
Turn signals: The parking lock P has not
4
been enabled.
Always on: No electrical network has
5
been detected. Arrange an inspection of
the power supply and network. Seek pro-
fessional assistance.
›››
Red LED Fig. 212:
Turn signals: Error in the charging system.
6
The charging process cannot start or has
paused.
Always on: The charging connector has
not been locked. Unplug the charging
connector and plug it back in to the
charging socket. If the problem persists,
seek professional help.
Charging socket lighting
In the dark, the charging socket's side lighting
(white LED) can facilitate orientation in the
vehicle:
Ignition
The vehicle has been unlocked.
●
OR: The charging connector has been un-
●
plugged from the charging socket.
»
309