Seat Leon 5D Owner's Manual page 42

Securing the child seat with the "ISOFIX/i-
Size" system
You must follow the child seat manufacturer's
instructions.
Open the cut-out section behind the
●
marked grooves to access the retaining rings
›››
Fig. 32.
Press the child seat onto the "ISOFIX" re-
●
taining rings until it is heard to engage se-
curely. If the child seat is equipped with Top
Tether anchor points, secure it to the corre-
›››
spondent ring page 40. Follow the child
seat manufacturer's instructions.
Pull on both sides of the child seat to ensure
●
that it is properly anchored.
Child seats with the "ISOFIX/i-Size" and Top
Tether attachment system can be purchased
from technical services.
WARNING
The securing rings are designed only for
use with "ISOFIX" and Top Tether system
child seats.
Never secure other child seats that do
●
not have the "ISOFIX" or Top Tether system,
or safety belts or any other objects to the
securing rings – as this can result in poten-
tially fatal injuries to the child.
Ensure that the child seat is correctly se-
●
cured to the "ISOFIX" and Top Tether secur-
ing rings.
40
Safety
Top Tether securing belts
Rear seats: adjustment and assembly
Fig. 34
according to the Top Tether belt.
Front passenger seat: adjustment and
Fig. 35
assembly according to the Top Tether belt.
Child seats with the Top Tether system come
with a strap for securing the seat to the vehi-
cle anchor point, located at the back of the
rear seat backrest and provide greater re-
straint.
The objective of this strap is to reduce for-
ward movements of the child seat in a crash,
to reduce the risk of injuries to the head from
hitting the inside of the vehicle.