Seat Leon 5D Owner's Manual page 252

The ACC sets the current speed, or the clos-
est speed within the valid range (30-210
km/h), as the cruise speed.
Depending on the driving situation, the fol-
lowing indicator lamps come on:
 It lights up green
a)
The ACC is active .
a) Only on analogue instrument clusters.
 It lights up green
ACC connected, no vehicle detected in front.
 It lights up green
ACC connected, vehicle detected in front.
When the ACC is in standby, the indicator
lamps light up in grey.
Setting speed
To program the speed, press the
›››
Fig. 179 buttons to the desired speed. The
speed is adjusted at intervals of 10 km/h (5
mph).
When the ACC is active, the button
pressed to increase the desired speed by 1
km/h (1 mph). You can then press
crease it by 1 km/h (1 mph).
250
Setting your distance level
The distance can be set to one of five levels,
from very short to very long:
Press the button
●
›››
Fig. 179.

Alternatively, press the button
●
times as necessary to set the desired dis-
tance.
Keep in mind each country's regulations on
minimum braking distances.
Suspend regulation (standby)
Briefly press the button
●
tion steering wheel or press the brake pedal.
The ACC indicator lamp is grey; the speed
and distance are saved.
If the ESC TCS
the ACC is automatically suspended.
Reinstating the cruise control
or
 
Press the
●

The ACC regulates to the last speed and dis-
tance setting.
can be

Switching off
to de-

Press and hold the button
●
is cleared.
Driving
and then the button or
 
as many

on the multifunc-

›››
page 276 is disconnected,
button.
. The set speed

Exceeding the speed regulated by the
ACC
While driving with the ACC switched on, the
driver can increase speed by pressing the
accelerator pedal. ACC regulation is suspen-
ded until you release the accelerator pedal
›››
.
Set the default distance setting
In the Infotainment system, you can pre-se-
lect the distance level when connecting the
ACC from:
Very short, Short, Medium, Long and Very
●
long using the Infotainment system:
›››
er assistance > ACC page
Changing the driving profile
In vehicles with SEAT Drive Profile, the driving
profile selected can have an influence on the
ACC's acceleration and braking behaviour
›››
page 232.
In vehicles without SEAT Drive Profile, the be-
haviour of the ACC can also be affected if
any of the following drive profiles are selec-
ted in the infotainment system in Drive assist.
ACC settings will be the same as those in the
SEAT Drive Profile.
WARNING
Before driving off, check that the road is
clear. The radar sensor may not detect
> Driv-

93.