Seat Leon 5D Owner's Manual page 189

Press Apple CarPlay™ to establish a con-
●
nection with the iPhone™.
Disconnecting
On the Apple CarPlay™ mode, press the
●
icon to access the Full Link main menu.
SEAT
Press to interrupt the active connection.
● 
The representation of function buttons on the
screen may vary.
Special characteristics
During an active Apple CarPlay™ connection,
the following characteristics are applicable:
Bluetooth® connections between the
●
iPhone™ and the infotainment system are not
possible.
If there is an active Bluetooth® connection,
●
it is automatically interrupted.
The phone functions are only available
●
through Apple CarPlay™. The functions de-
scribed for the Infotainment system are not
available.
The connected iPhone™ cannot be used as
●
a multimedia device in the Media main menu.
It is not possible to use the built-in naviga-
●
tion system and the Apple CarPlay™ naviga-
tion system at the same time. The last route
started interrupts the one that was previously
active.
Data transfer
Depending on the infotainment system you
●
use, on the instrument panel screen you can
view data from the Telephone mode.
The instrument panel screen does not dis-
●
play any indication to turn.
With the multifunction steering wheel you
●
can accept or reject incoming calls, as well
as end an ongoing telephone conversation.
voice control
Press briefly to start voice control using
●

the infotainment system.
Press this button for a long time to start
●
voice control (Siri™) of the connected
iPhone™.
Note
The availability of technologies depends
●
on the country and may vary.
You will find information about technical
●
requirements, compatible iPhones, certi-
fied applications and their availability on
the SEAT (www.seat.com) and Apple Car-
Play ™ websites, or at SEAT dealerships.
Android Auto™
Requirements for Android Auto™
In order to use Android Auto™, the following
requirements must be met:
The mobile phone device, called smart-
●
phone from here on, has to be compatible
with Android Auto™.
The smartphone must have an Android Au-
●
to™ application installed.
The smartphone has to be connected
●
through the USB connection with data trans-
mission with the infotainment system.
The USB cable used must be an original ca-
●
ble provided by the smartphone manufactur-
er.
Establish connection
When you first connect a smartphone, follow
the instructions on the infotainment system
screen and on the smartphone.
The requirements must be met to use Android
Auto™.
Launch Android Auto™:
Press HOME > Full Link to access the Full
●
Link main menu
OR: press APP to access the Full Link main
●
menu.
Press Android Auto™ to establish a connec-
●
tion with the smartphone.
»
187