OR: press
and enter the address in
the input screen.
OR: detailed address.
3.
Press Start.
Frequent destinations
The destination synopsis uses recorded data
to propose possible destinations.
Select the destination and start naviga-
tion
1.
Press
and then
2.
Select the desired destination. The route
guidance starts automatically.
Quick start: for a quick start, press and hold
the desired destination for a few seconds.
Last destinations
Navigation saves the last destinations to
make them available for a route guidance.
Select the destination and start naviga-
tion
1.
Press
and then
2.
Press the desired destination.
3.
Press Start.
Quick start: for a quick start, press and hold
the desired destination for a few seconds.
204
Favourite destinations
Save up to 20 destinations as favourites.
To save a destination as a favourite press
in the split screen when entering the destina-
tion.
Select the destination and start naviga-
tion
1.
Press
2.
Press the desired destination.
3.
Press Start.
.
Note
Enter the destination as accurately as pos-
sible. If you enter a destination incorrectly,
the route guidance will not be able to start
or it will guide you to an incorrect destina-
tion.
Start route guidance by selecting
from the map
The navigation map includes active areas at
.
many points that are suitable for entering the
destination. To do this, press the desired posi-
tion or place on the map. If there is map data
at this point, you can start a route guidance.
Whether it is possible to enter the destination
through the navigation map depends on the
Infotainment system
and then
.
state of the data and it is not possible for all
positions.
To start "offroad navigation", press an empty
area without position data.
Start navigation
Press
.
●
Move the view on the map until the desired
●
position can be selected. The navigation map
can be used by means of additional finger
›››
movements
page
201.
Press the desired destination on the map.
●
Press Route.
●
Offroad navigation*
"Offroad navigation" calculates routes to se-
lected destination points using unknown da-
ta. When a destination point is outside the
known roads or position data, navigation
finds the route to the next point of the known
road and completes the path to the next des-
tination point with a direct connection.
Start navigation
Move the view on the map until the desired
●
position can be selected. The navigation map
can be used by means of additional finger
›››
movements
page
201.
Press on any point on the map without posi-
●
tion data.
Press Route.
●