Seat Leon 5D Owner's Manual page 126

With the ignition on and without light activa-
tion, the analogue instrument panel lighting
remains activated in daytime light conditions.
The lighting is reduced as the exterior light di-
minishes. In some cases, e.g. when driving
through a tunnel without the
tive, the instrument panel lighting may even
switch off. The objective of this function is to
provide the driver with a visual indication that
he or she should activate the dipped beam.
If your vehicle is equipped with a digital in-
strument panel (Digital SEAT Cockpit), the
following message will appear Turn on the
lights on the instrument panel.
Interior and reading lights
Detail of roof lining: front lighting of
Fig. 104
the passenger compartment.
124


function ac- 

Reading light
The reading light is tactile, each lens is turned
on and off individually by pressing in the re-
spective central area. In addition, the intensi-
ty of the light can be adjusted according to
the pressure exerted.
If you want to turn on the two lenses together
you must press the symbol
Glove compartment and luggage com-
partment lighting*
When opening and closing the glove com-
partment on the front passenger side and the
rear lid, the respective light will automatically
switch on and off.
Footwell lighting*
The lights in the footwell area below the dash
(driver and front passenger sides) will switch
on when the doors are opened and will de-
Operation
Turning the interior lights on or off.
Door contact connection.
The interior lights come on automatically
when you unlock the vehicle, open a door
or disconnect the ignition.
The light goes out a few seconds after
closing all the doors, when locking the ve-
hicle or connecting the ignition.
›››
Fig. 104.

crease in intensity while driving. This intensity
can be adjusted through the infotainment
system menu using the function button
›››
Interior > Light page 93.
Note
The reading lights go out when the vehicle
is closed and locked or after a few minutes
of turning the ignition off. This prevents the
12-volt vehicle battery from discharging.
>
