Close the rear lid.
●
Closing the tailboard
Lift the tailboard cover until it engages. The
●
red mark on the luggage compartment side
should never be visible.
Close the rear lid.
●
Lift the centre armrest if necessary.
●
Note
The tailboard can also be opened from the
luggage compartment. To do so, press the
release lever down, in the direction of the
›››
arrow, and the cover upwards
Transport and practical equipment
Net partition*
Using the separation net behind
the rear seat*
3 Valid for: LEON Sportstourer
Fig.
137.
In the luggage compartment: secur-
Fig. 138
ing the net partition.
In the luggage compartment: remov-
Fig. 139
ing the net partition.
Pulling out and securing the net partition
›››
Pull up handle
Fig. 138
●
2
net from the casing
.
4
Hook in the net partition on the right or left
●
side
(magnified image).
3
Hook in the net partition into the housing on
●
the other side
by pulling the rod.
1
The net partition is properly assembled when
the T-shaped ends are firmly secured in the
corresponding housings
and
3
Retracting the net partition
Unhook the rod from the housings
●
.
1
Roll up the net into the casing
●
with your hand.
Removing the net partition
Fold the rear seat backrests forward.
●
Press the left or right release catch
●
›››
Fig. 139
in the direction of the arrow
Remove the casing from the support in the
●
›››
direction of the arrow
Fig. 139
Fitting the net partition
Fold the rear seat backrests forward.
●
Fit the casing in the right and left supports.
●
Press the casing into the left and right sup-
●
ports in the opposite direction to the arrow
›››
Fig. 139
until it engages.
2
to remove the
.
1
and
3
lowering it
4
.
1
.
2
»
145