- 10 km/h (5 mph)
Interrupting the adjustment
Press the
button.
●
The speed is stored.
Reinstating the cruise control
Press the
button.
●
The limiter will re-activate as soon as the ve-
hicle is moving at a speed lower than the
saved one.
Switching off
Press and hold the button
.
●
The speed limiter switches off and the speed
is deleted.
Switch to cruise control (GRA) or adaptive
cruise control (ACC)
Press the
button.
●
Observe the corresponding message on
●
the instrument cluster display.
The speed limiter is switched off.
Note
Depending on the equipment, the speed
limiter can be found on the multifunction
steering wheel or on the turn signal lever.
Driver assistance systems
Operating the speed limiter with
the turn signal lever
On the turn signal lever: buttons to
Fig. 175
operate the speed limiter.
Connecting
›››
Move control
Fig. 175
to position
●
1
and press button
.
2
The last programmed speed is stored. It does
not take effect yet.
Activating the speed limiter
›››
While driving, press button
●
the area
.
The current speed is stored as the maximum
speed.
Setting the programmed speed
You can set the speed using button
›››
Fig. 175
:
3
Briefly press area
●
small increments of 1 km/h (1 mph).
Press and hold the area
●
ously increase speed in increments of 10
km/h (5 mph).
Briefly press area
●
in small increments of 1 km/h (1 mph).
Press and hold area
●
decrease speed in increments of 10 km/h (5
mph).
The speed is limited to the set value.
Switching off the speed limiter
Move control
●
The system switches off.
Switching off temporarily
If you want to temporarily deactivate the
speed limiter, e.g. for overtaking, move the
›››
control
Fig. 175
press button
After overtaking, the speed limiter can be ac-
Fig. 175
in
3
tivated with the previously programmed
speed by pressing button
area
.
Troubleshooting
The speed limiter is not active.
to increase speed in
to continu-
to decrease speed
to continuously
›››
Fig. 175
to position
.
1
to position
or
1
.
2
›››
Fig. 175
in the
3
»
243