Seat Leon 5D Owner's Manual page 75

Open the Service menu
Vehicles with analogue instrument panel:
To open up the Service menu, select the
●
information profile while in the Driv-
Range
menu, and keep the
ing data 
on the multifunction steering wheel for ap-
proximately 5 seconds. When it is released,
the Service menu will be displayed. Now
you can browse through the menu using the
keys on the multifunction steering wheel as
usual.
Vehicles with digital instrument panel (SEAT
Digital Cockpit):
While in Classic View , go to the Initial Da-
●
ta screen, press the button on the multi-

function steering wheel for about 5 seconds
and release it.
Next, the Configuration list menu is
●
displayed, where you can choose between
the Service menu or the View selection
from where the instrument cluster views can
be switched on and off.
Restart the service interval display
Select the Service menu and follow the in-
structions on the screen of the instrument
panel.
Instruments and warning/control lamps
Restart the oil service
Select the Restore Oil service menu and
follow the instructions on the instrument pan-
el display.
key pressed
Restart journey data
Select the Reset trip menu and follow the
instructions on the instrument panel display
to reset the value.
Identifying letters on engine (LDM)
Select the menu Engine code . The identify-
ing letters of the engine will be shown on the
instrument cluster display at the bottom left.
Setting the clock
Select the Time menu and set the correct
time by turning the right thumbwheel of the
multifunction steering wheel.
Tyre pressure
To save the tyre pressure after inflating or
changing tyres
structions on the instrument cluster.
›››
page 346. Follow the in-
Driving data indicator (multifunc-
tion display)
3 Applies to vehicles with analogue instrument
panel
The display of the travel data (multifunction
display) shows different values about the
journey and the consumption.
Change from one display to another
Vehicles without multifunction steering wheel:
Press the rocker switch on the wiper lev-
●

›››
er page 85.
Vehicles with multifunction steering wheel:
Turn the right thumbwheel of the multifunc-
●
›››
tion steering wheel page 85.
Changing memory
Vehicles with analogue instrument panel:
Press the button on the windscreen
●

wiper lever or the button of the multifunc-

tion steering wheel.
Vehicles with digital instrument panel:
Depending on the view, select Trip data
●
and press the left arrow or the

the multifunction steering wheel.
– The memory is deleted if
Since start:
the journey is interrupted for more than 2
hours.
button on
»
73