Garmin G1000 Pilot's Manual page 238

Integrated flight deck for the piper pa-32 saratoga series
Hide thumbs Also See for G1000:
Table of Contents

Advertisement

FLIGHT MANAGEMENT
Creating a user-defined hold at a direct-to waypoint:
1) Press a ¯ Key and set up the direct-to waypoint as desired, but select HOLD? instead of ACTIVATE? when
finished.
2) Use the FMS Knobs to edit the course, and press the ENT Key.
3) Use the small FMS Knob to select INBOUND or OUTBOUND course direction, and press the ENT Key.
4) Use the small FMS Knob to select TIME or DIST length mode, and press the ENT Key.
5) Use the FMS Knobs to edit the length, and press the ENT Key.
6) Use the small FMS Knob to select RIGHT or LEFT turn direction, and press the ENT Key.
7) Use the FMS Knobs to edit the EXPECT FURTHER CLEARANCE Time (EFC TIME), and press the ENT Key.
8) Press the ENT Key while ACTIVATE? is highlighted to activate the direct-to with the user-defined hold defined
at the direct-to waypoint. (If the direct-to waypoint is part of the active flight plan, the HOLD is inserted into
the active flight plan. If the direct-to waypoint is not part of the active flight plan, an off-route direct-to hold is
created.)
Exiting a user-defined hold inserted into the active flight plan:
Press the SUSP Softkey. The system will provide guidance to follow the holding pattern to the inbound course
and resume automatic waypoint sequencing.
Removing a user-defined hold inserted into the active flight plan:
1) Press the FPL Key.
2) Push the FMS Knob to activate the cursor (not required on the PFD) and turn the large FMS Knob to highlight
the HOLD waypoint.
3) Press the CLR Key. A 'Remove Holding Pattern?' confirmation window is displayed.
4) Select OK and press the ENT Key. The holding pattern is removed from the active flight plan. Select CANCEL
and press the ENT Key to cancel the removal of the holding pattern.
Removing a user-defined hold at an off-route direct-to:
1) Press a ¯ Key to display the DIRECT TO Window.
2) Press the MENU Key to display the PAGE MENU Window with the cursor on the 'Cancel Direct-To NAV' selection.
3) Press the ENT Key. The holding pattern is removed.
218
Garmin G1000 Pilot's Guide for the Piper PA-32 Saratoga
190-02692-00 Rev. A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents