Garmin G1000 Pilot's Manual page 391

Enabling/disabling the Motion Vector display:
1) Select the MAP - TRAFFIC MAP Page.
2) Press the MOTION Softkey.
3) Press one of the following softkeys:
ABS:
•
REL:
•
OFF:
•
Or :
a) Select the MAP - TRAFFIC MAP Page.
b) Press the MENU Key.
c) Turn the small FMS Knob to highlight 'Relative Motion', 'Absolute Motion' or 'Motion Vector Off'.
d) Press the ENT Key.
Relative Motion
Vectors
Adjusting the duration for the Motion Vector projected time:
1) Select the MAP - TRAFFIC MAP Page.
2) Press the MOTION Softkey.
3) Press the DURATION Softkey.
4) Press a softkey for the desired duration (30 SEC, 1 MIN, 2 MIN, 5 MIN).
5) When finished, press the BACK Softkey to return to the MAP - TRAFFIC MAP Page.
190-02692-00 Rev. A
Displays the motion vector pointing in the absolute direction.
Displays the motion vector relative to own aircraft
Disables the display of the motion vector.
Figure 6-94 MAP - TRAFFIC MAP Page with Relative Motion Vectors Enabled
Garmin G1000 Pilot's Guide for the Piper PA-32 Saratoga
HAZARD AVOIDANCE
371