Garmin G1000 Pilot's Manual page 125

Integrated flight deck for the piper pa-32 saratoga series
Hide thumbs Also See for G1000:
Table of Contents

Advertisement

NAV VOL/ID Knob – Controls NAV audio volume level. Push to turn the Morse code identifier audio
1
on and off. Volume level is shown in the NAV frequency field as a percentage.
NAV Frequency Transfer Key – Transfers the standby and active NAV frequencies.
2
NAV Knob – Tunes the standby frequencies for the NAV receiver (large knob for MHz; small knob for
3
kHz). Push to move the tuning box (cyan box) and Frequency Transfer Arrow between NAV1 and NAV2.
NAV Frequency Box – Displays NAV standby and active frequency fields, volume, and station ID. The
4
frequency of the NAV radio selected for navigation is displayed in green.
COM Frequency Box – Displays COM standby and active frequency fields and volume. The selected
5
COM transceiver frequency is displayed in green.
COM Knob – Tunes the standby frequencies for the COM transceiver (large knob for MHz; small knob
6
for kHz). Push to move the tuning box (cyan box) and Frequency Transfer Arrow between COM1 and
COM2.
COM Frequency Transfer Key – Transfers the standby and active COM frequencies. Press and hold
7
this key for two seconds to tune the emergency frequency (121.500 MHz) automatically into the active
frequency field.
COM VOL/SQ Knob – Controls COM audio volume level. Push to turn the COM automatic squelch
8
on and off. Volume level is shown in the COM frequency field as a percentage.
ADF/DME Tuning Window – Displays ADF frequencies, volume setting, and modes, and DME tuning
9
selection. Display by pressing the ADF/DME Softkey.
ENT Key – Validates or confirms a selection.
10
FMS Knob – Flight Management System Knob, used to enter transponder codes, enter ADF
11
frequencies, select ADF/DME modes, and Auto-tune entries when ADF/DME TUNING WINDOW or
NRST Window is present. Push the FMS Knob to turn the selection cursor on and off. The large knob
moves the cursor in the window. The small knob selects individual characters for the highlighted
cursor location.
Transponder Data Box – Indicates the selected transponder code, operating mode, reply, and ident
12
status for the transponder.
190-02692-00 Rev. A
Garmin G1000 Pilot's Guide for the Piper PA-32 Saratoga
AUDIO PANEL AND CNS
105

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents