Secure Digital (Sd) Cards - Garmin G1000 Pilot's Manual

SYSTEM OVERVIEW

1.3 SECURE DIGITAL (SD) CARDS

NOTE: DO NOT use the database SD cards for any purpose other than database storage.
Refer to the Appendices for instructions on updating databases.
NOTE:
Ensure the system is powered off before inserting the SD card.
NOTE:
The PFD and MFD data card slots use Secure Digital (SD) cards and are located on the top right portion of the
display bezels. Each display bezel is equipped with two SD card slots. SD cards are used for various databases,
system software updates, recording flight data, and storing electronic documents. Not all SD cards are compatible
with the system. Use only SD cards supplied by Garmin or the aircraft manufacturer.
Installing an SD card:
1) Insert the SD card in the SD card slot, pushing the card in until the spring latch engages (the front of the card
should remain flush with the face of the display bezel).
2) To remove, gently push on the SD card to release the spring latch and eject the card.
4
SD Card Slots
Figure 1-2 Display Bezel SD Card Slots
Garmin G1000 Pilot's Guide for the Piper PA-32 Saratoga 190-02692-00 Rev. A