Garmin G1000 Pilot's Manual page 338

HAZARD AVOIDANCE
Potential Impact Point Symbol
The MAP - TERRAIN-SVS Page is the principal page for viewing terrain and obstacle information. In addition,
Terrain-SVS information can be displayed on the following pages and maps for reference:
- PFD Inset Map
- MAP - NAVIGATION MAP Page
Displaying terrain and obstacle information (maps other than the MAP - TERRAIN-SVS Page):
1) Press the MAP Softkey (for the PFD Inset Map, select the INSET Softkey).
2) Press the TERRAIN Softkey to display terrain and obstacle data.
When Terrain-SVS is selected on maps other than the MAP - TERRAIN-SVS Page, an icon to indicate the
feature is enabled for display and a legend for Terrain-SVS terrain colors is shown.
The MAP - NAVIGATION MAP Page Setup Menu provides a means in addition to the softkey for enabling/
disabling display of terrain and obstacles. The setup menu also controls the map range settings above which
terrain and obstacle data are decluttered from the display. If a map range larger than the map range setting is
selected, the data is removed from the map. For terrain data, the enable/disable function applies only to the
MFD, while the range setting also affects the PFD Inset Map.
Terrain data can be selected for display independently of obstacle data; however, obstacles for which warnings
and cautions are issued are shown when terrain is selected for display and the map range is within the setting
limit.
Maps other than the MAP - TERRAIN-SVS Page use settings based on those selected for the MAP - NAVIGATION
MAP Page. The maximum display ranges for obstacles on each map are dependent on the range setting made
for the Navigation Map. If the maximum range for obstacle display on the Navigation Map is adjusted to below
20 nm, the highest obstacle display range settings on the other applicable maps are also adjusted proportionally.
Customizing terrain and obstacle display on the MAP - NAVIGATION MAP Page:
1) Select the MAP - NAVIGATION MAP Page.
2) Press the MENU Key.
3) With Map Setup highlighted, press the ENT Key.
4) Turn the small FMS Knob to select the Map Group and press the ENT Key.
5) Turn the large FMS Knob or press the ENT Key to scroll through product selections.
• TERRAIN DATA – Turns the display of terrain data on or off and sets maximum range at which terrain is shown
• OBSTACLE DATA – Turns the display of obstacle data on or off and sets maximum range at which obstacles are shown
6) Turn the small FMS Knob to scroll through options for each product (ON/OFF, range settings).
7) Press the ENT Key to select an option.
8) Push the FMS Knob or CLR Key to return to the MAP - NAVIGATION MAP Page with the changed settings.
318
Table 6-10 Terrain-SVS Potential Impact Point Symbols with Alert Types
Garmin G1000 Pilot's Guide for the Piper PA-32 Saratoga
Alert Type Example Annunciation
Warning
Caution
- Flight Plan Pages
- AUX - TRIP PLANNING Page
190-02692-00 Rev. A