Garmin G1000 Pilot's Manual page 131

AUTO-TUNING FROM THE MFD
Frequencies can be automatically loaded into the COM Frequency Box from pages in the NRST or WPT
page group by highlighting the frequency and pressing the ENT Key.
Auto-tuning a COM frequency from the WPT and NRST Pages:
1) From any page the COM frequency can be auto-tuned, activate the cursor by pushing the FMS Knob or the
appropriate softkey.
2) Turn the FMS Knob to place the cursor on the desired COM frequency.
3) Press the ENT Key to load the COM frequency into the standby field of the selected COM radio.
4) Press the Frequency Transfer Key to transfer the frequency to the COM Active Frequency Field.
190-02692-00 Rev. A
Figure 4-8 NEAREST AIRPORTS Window (PFD)
Garmin G1000 Pilot's Guide for the Piper PA-32 Saratoga
AUDIO PANEL AND CNS
Press the NRST Softkey to open
the NEAREST AIRPORTS Window
111