Table of Contents
Advertisement
3CommonSetupExamples-New.fm Page 27 Monday, June 9, 2003 2:52 PM
S e t u p
Connecting to an amplifier equipped with Dolby Surround Pro Logic Dolby
Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an
amplifier and speaker system (right and left front speakers, a center speaker, and one or
two rear speakers).
•
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in "Connecting to an amplifier
equipped with a Dolby Digital decoder." Refer to that amplifier's owner's manual and
set the amplifier so you can enjoy Dolby Surround Pro Logic sound.
•
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
Amplifier equipped with
Dolby Surround Pro Logic
4 :
C o n n e c t i n g
To audio input
ANALOG AUDIO OUT
Audio cable
t o
O p t i o n a l
A u d i o
Be sure to set "Digital Output" to
"Bitstream" or "PCM" when you enjoy
sounds of Dolby Surround Pro Logic using
this connection. (See the DVD Play
Operation Guide for more information.)
•
Connect one or two rear speakers.
The output sound from the rear speakers
will be monaural even if you connect two
rear speakers.
E q u i p m e n t
3
27
Advertisement
Chapters
Table of Contents
Troubleshooting
