Making A Wired (Ethernet) Connection - Toshiba SD-H400-S-TU Installation Manual

Making a Wired (Ethernet) Connection

This example shows how to connect a DVR to a network hub using a wired (Ethernet)
network adapter.
To connect a wired (Ethernet) network adapter to your DVR and your network hub:
1. Connect the adapter to the DVR. Connect the USB end of the Ethernet adapter to the
USB port on the DVR.
2. Connect the Ethernet cable. Plug one end of an Ethernet cable into the Ethernet
adapter, and plug the other end into your home network's hub or router.
3. Important message. The first time you connect a network adapter, you will see an
Important Message the next time you press the TiVo button. Review it, then press
SELECT on the remote control to go to TiVo Central.
4. Next Step. If your home network has DHCP, wait for a few minutes for your DVR to
automatically complete its network settings, and then you are done. If your network
does not have DHCP, or you are having trouble establishing a network connection, go
to "Completing the DVR's Network Settings" on page 86. (DHCP is described in
"Basic TCP/IP Concepts" on page 90.)
M a k i n g a W i r e d ( E t h e r n e t ) C o n n e c t i o n
7
85