Toshiba SD-H400-S-TU Installation Manual page 169

C h a p t e r 7
84
C o n n e c t i n g t o a H o m e N e t w o r k
adapter near the DVR's power supply or on a power strip or surge protector. Doing so
can cause signal interference or reduce signal strength.
4. Firmware update. When you first connect a wireless network adapter to your DVR,
you may see a screen that says "Firmware Update Required." This means your DVR
has a software update for the wireless network adapter you have connected. Select the
option to update. This should not take more than a minute or two.
During the update, do not disconnect the network adapter wires or the power to the
DVR. Either action might damage the adapter.
5. Important message. The first time you connect a network adapter, you will see an
Important Message the next time you press the TiVo button. Review it, then press
SELECT on the remote control to go to TiVo Central.
6. Next Step. Go to "Completing the DVR's Network Settings" on page 86.