Toshiba SD-H400-S-TU Installation Manual page 19

1ControlsIdentification.fm Page 6 Monday, June 9, 2003 2:49 PM
C h a p t e r 1
Notes on batteries
• Improper use of batteries may cause
battery leakage and corrosion. To operate
the remote control correctly, follow the
instructions below.
• Do not insert batteries into the remote
control in the wrong direction.
• Do not charge, heat, open, or short-
circuit the batteries. Do not throw
batteries into a fire.
• Do not leave dead or exhausted batteries
in the remote control.
• Do not use different types of batteries
together, or mix old and new batteries.
• If you do not use the remote control for a
long period of time, remove the batteries
to avoid possible damage from battery
corrosion.
• If the remote control does not function
correctly or if the operating range
becomes reduced, replace all batteries
with new ones.
• If battery leakage occurs, wipe the
battery liquid from the battery
compartment, then insert new batteries.
6
Loading batteries
1. Open the cover.
2. Insert batteries (AAA size).
Make sure to match the + and – on the batteries to the marks inside the battery
compartment.
3. Close the cover.
I d e n t i f i c a t i o n