Toshiba SD-H400-S-TU Installation Manual page 192

I cannot use features in Pick Programs to Record. The DVR says it is organizing program information.
• Your DVR may not have all its program information yet. The first time you go through Guided Setup, the DVR downloads program
information from the TiVo service. The DVR then indexes this information in the background over the next 4 to 8 hours. As the
program information gets indexed, more of it becomes available. After 8 hours, program information (for up to three days from the
time of the last successful connection) is available for you to use. Wait a few hours, then try to find your program again.
• If the DVR loses power while it is indexing program information, the indexing process will stop until the DVR makes a successful
connection to the TiVo service, and then will start again. If your DVR lost power while it was indexing program information, you
can get it to start indexing again by plugging it in and then starting a connection to the TiVo service. To start a connection to the
TiVo service, go to TiVo Central, then select Messages & Setup, then Settings, then Phone & Network, then "Connect to the TiVo
service now."
Upgrade to TiVo Plus
If you upgrade to TiVo Plus, you'll have up to two weeks' worth of program guide information. (For more information, see page
57.)
What happens if a sports event I have scheduled to record goes into overtime?
• If you are watching a program while it's being recorded, you can record an overtime segment by pressing the RECORD button after
the regularly scheduled part of the program has finished.
[TiVo Plus only] The TiVo service cannot predict whether a sporting event might go into overtime, but we provide a feature that lets
•
you add from one extra minute to three hours at the end of a recording just in case. The feature is called the Overtime Scheduler. (For
more information, see page 54.)
The Overtime Scheduler has two options: "Start Recording" and "Stop Recording." Both are available on the Recording Options
screen. You can even use the Overtime Scheduler to change the scheduled end of a recording while the program is being recorded.
(Go to Now Playing, select the recording, then select "Change recording options." On the Recording Options screen that appears,
Q u e s t i o n s A b o u t R e c o r d i n g P r o g r a m s
8
107