www.allice.de
®
R&S
NRX
15 Troubleshooting
15.1 Displaying Information
15.2 Error Messages
User Manual 1178.5566.02 ─ 07
●
Displaying
Information...........................................................................................483
●
Error
Messages.....................................................................................................483
●
Performing
Tests................................................................................................... 487
●
Collecting Information for Technical
●
Contacting Customer
Status information
Status information is displayed in the title bar of the graphical user interface. See
Chapter 4, "Operating
Concepts",
In remote control, the status reporting system stores all information on the current
operating state and occurred errors. See:
●
Chapter 13.14, "Using the Status
●
Chapter 14.4, "Status Reporting
Instrument information
Instrument information, including the installed hardware and software options, is availa-
ble under
Chapter 11.2, "Instrument
The hardware configuration is provided separately under
Configuration",
on page 162.
In remote control, use the commands described in
mation",
on page 398.
Sensor information
You can display information about one of the connected power sensors. See
Info"
on page 150.
In remote control, use the commands described in
mation",
on page 398.
The graphical user interface has a notification center where all information, warning
and error messages are collected. See
In remote control, use the commands described in
and
Configuration",
on page 387.
Support.........................................................487
Support...............................................................................488
on page 31.
Register",
on page 406
System",
on page 461
Info",
on page 152.
Chapter 4, "Operating
Allice Messtechnik GmbH
Troubleshooting
Error Messages
Chapter 11.3, "Hardware
Chapter 13.13.7, "Instrument Infor-
Chapter 13.13.7, "Instrument Infor-
Concepts",
on page 31.
Chapter 13.13, "System Information
"Sensor
483