Flow Chart For Troubleshooting - R&S FSV-K70 Manual

®
R&S FSV-K70
Message: Result Ranges Overlap
This message does not indicate an error. It is merely displayed to inform you that the
defined result ranges in the capture buffer overlap. Thus, some captured data is evalu-
ated more than once. For example, the same peak value may be listed several times if
it is included in several result ranges, and averaging is performed on (partially) dupli-
cate values. However, a negative influence on the measurement results is not to be
expected.

6.2 Flow Chart for Troubleshooting

If you experience a concrete measurement problem, you might want to try solving it
with the help of the flow-chart.
Operating Manual 1176.7578.02 ─ 09
Support
Flow Chart for Troubleshooting
348