®
R&S
NRX
15 Troubleshooting
●
Displaying
●
Error
●
Performing
●
Collecting Information for Technical
●
Contacting Customer
15.1 Displaying Information
Status information
Status information is displayed in the title bar of the graphical user interface. See
Chapter 4, "Operating
In remote control, the status reporting system stores all information on the current
operating state and occurred errors. See:
●
Chapter 13.14, "Using the Status
●
Chapter 14.4, "Status Reporting
Instrument information
Instrument information, including the installed hardware and software options, is availa-
ble under
The hardware configuration is provided separately under
Configuration",
In remote control, use the commands described in
mation",
Sensor information
You can display information about one of the connected power sensors. See
Info"
In remote control, use the commands described in
mation",
15.2 Error Messages
The graphical user interface has a notification center where all information, warning
and error messages are collected. See
In remote control, use the commands described in
and
Configuration",
User Manual 1178.5566.02 ─ 07
Information...........................................................................................483
Messages.....................................................................................................483
Tests................................................................................................... 487
Support...............................................................................488
Concepts",
Chapter 11.2, "Instrument
on page 162.
on page 398.
on page 150.
on page 398.
on page 387.
Support.........................................................487
on page 31.
Register",
on page 406
System",
on page 461
Info",
on page 152.
Chapter 13.13.7, "Instrument Infor-
Chapter 13.13.7, "Instrument Infor-
Chapter 4, "Operating
Chapter 13.13, "System Information
Troubleshooting
Error Messages
Chapter 11.3, "Hardware
"Sensor
Concepts",
on page 31.
483