Huawei UPS5000-A-500 kVA User Manual page 88

UPS5000-A-500 kVA
User Manual (e-shelter)
Item
Voltage (V)
Current (A)
Temperature (° C)
Backup time (min)
Remaining cap. (%)
SOH
Table 4-8 Total runtime
Item
Bypass runtime (h)
Inv. runtime (h)
The value must be an integer. For example:


Table 4-9 Environment data
Item
Ambient temperature (° C)
Ambient humid. (%)


Issue 02 (2020-01-10)
If the value is less than 1, the value takes 0.
If the value is greater than or equal to 1 and less than 2, the value takes 1.
Battery Detailed Data - Batt. String Data: reflects the voltage, current, SOC, and SOH
data of each battery string.
Battery Detailed Data - String N Battery Data: reflects the temperature, voltage, internal
resistance, current, SOC, and SOH data of a single battery in the battery string.
Copyright © Huawei Technologies Co., Ltd.
Description
Float charging, Hibernating, discharging, or Not chg.
or dis.
Voltage of the battery string.
Current of the battery string (the current is + when
batteries are being charged and – when discharged).
Battery operating temperature (A battery sensor is
required. If the sensor is not installed, NA is displayed).
Battery backup time estimated at the current load.
Remaining battery capacity.
State of health.
Description
Time for which the UPS runs in bypass mode.
Time for which the UPS runs in inverter mode.
Description
Temperature measured by the ambient temperature and
humidity sensor. (An ambient temperature and humidity
sensor is required. If no sensor is connected, the ambient
temperature sampled by the bypass module is displayed.)
Humidity measured by the ambient temperature and
humidity sensor. If the sensor is not installed, NA is
displayed.
4 User Interface
80