Table of Contents
Advertisement
UPS5000-A-500 kVA
User Manual (e-shelter)
Figure 4-57 Site configuration
The standard protocols SNMP V1 and SNMP V2 have security risks. You are advised to use the secure
protocol SNMP V3.
The standard encryption algorithms MD5 and DES have security risks. You are advised to use the secure
encryption algorithms SHA and AES.
Issue 02 (2020-01-10)
The NTP parameters are used to set the NTP server address, port number, and
synchronization interval.
The default SNMP version is SNMPv3, and the preset MD5/SHA password is
Changeme1, and the preset DES/AES password is Changeme2. Change the password
after your first login, preventing unauthorized access.
To obtain the MIB file, choose Config. > Site Config. > SNMP > Download
HUAWEI_UPS_MIB.
SNMP Trap indicates the IP address of the server configured with network management
system (NMS) software. If SNMP Trap is incorrectly set or not set, system information
will be lost or not reported in time.
The certificate is used for Secure Sockets Layer (SSL) encryption protection for WebUI
login. You need to apply to a third-party institution for the certificate.
Configuration Management is used to upload and export configuration parameters in
the monitoring system.
Multi-brand Management is used to import the brand information of a partner to the
corresponding WebUI.
Specify Email server IP address, Sender's email, and User account authentication
required when sending a mail and click Test to check whether the test email can be
received. Configure Alarm Notification Server is used to configure a server for
receiving alarm emails from the monitoring system.
Set Email and Alarm Severity and simulate an alarm. Check that the alarm email can be
received. Configure Alarm Notification Email Address is used to configure the email
address for receiving alarm emails from the monitoring system.
ModbusTCP Certificate Management: ModbusTCP supports the Transport Layer
Security (TLS) secure protocol for encrypted transmission and implements access
authentication through the bidirectional certificate. Customers can replace the UPS
certificate with the certificate trusted by them.
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
121
Advertisement
Table of Contents
