Required Tools - Quadratec QR3 Installation Manual

A Few Words About Product Safety:
Your Side Tube Steps are designed to
enhance the utility and enjoyment of
your off road capable vehicle. Before
installation, please take a moment to
review the following safety information
Before You Begin Installation:
Congratulations on your purchase of the
Quadratec Tubular Side Steps for your
Jeep Wrangler.
®
When unpacking, check to make sure all
parts are included and not damaged due
to shipping. If any part is missing or
broken, please call Customer Service
at 800-745-6037 as soon as possible.
Product Care and Maintenance:
These custom fit steps have been
designed for long life and great looks.
With proper care, they are designed to
provide years of use.
Please see page 8 in this instruction
booklet for all suggested care for your
Quadratec Side Tube Steps.
and installation instructions. Important
safety information is generally preceded
by one of three signal words indicating
the relative risk of injury.
The signal words mean:
a hazardous situation which, if not avoided, could result in death or
serious injury. You CAN be KILLED or SERIOUSLY HURT if you don't
follow instructions.
a hazardous situation which, if not avoided, could result in minor or
moderate injury. You CAN be moderately HURT and also may suffer
property damage if you don't follow instructions.
Careful attention is required to this instruction or operation but does
generally not relate to personal injury. Damage to your Quadratec
product or other property may result if you don't follow instructions.
Due to the length and bulk of these
steps, we strongly suggest you get the
help of a friend for steps that involve
lifting, locating or holding the side steps
during installation.
Thank you again for your purchase
and let's start the installation process.
As you unpack your tube side steps, be careful not to scratch the fin-
ish with a knife or razor. We suggest placing the unpacked bumper
back into the original box so it does not get scratched before the in-
stallation begins. It is highly recommended that a second person assist
with the installation of these tube side steps.
The Trusted Source
2

REQUIRED TOOLS:

Safety Glasses
10mm Socket and Driver
13mm Socket and Driver
16mm Socket
4mm Allen Wrench
Torque Wrench
®
®