Advertisement
Quick Links
QuadraTop
Replacement Soft Top
Installation Manual for '07-'18 4-Door Wrangler (JKU)
Items:
#
11000.5035,
PARTS LIST:
FABRIC TOP - QTY 1
QUARTER WINDOW, RIGHT - QTY 1
QUARTER WINDOW, LEFT - QTY 1
REAR WINDOW - QTY 1
EARLY JK CONVERSION KIT
(07-09 MODELS ONLY) - QTY 1
HEADER FOAM PACK - QTY 1
FABRIC SPRING GUARDS - QTY 2
#
11000.4435,
11001.3624 & 11001.3724
Loss of vehicle control involves risk of death or serious injury,
particularly to parts of your body not restrained within vehicle.
This product is intended for weather protection only and should
not be relied upon to contain occupants in the event of an accident
or to protect from either ground contact or falling objects.
To reduce risk of accident or injury:
ALWAYS WEAR SEATBELTS
Always keep head, arms & body parts within vehicle.
Fully secure or stow the soft top before driving according
to instructions. Never try to latch or fold soft top while driving.
Do not use if damaged or worn.
Read and follow all instructions & warnings accompanying
this product, in your vehicle owner's manual and Off Road
Driving Supplement.
RISK OF EYE INJURY. Safety glasses should be worn at all times
while installing or maintaining this product.
Fabric
®
#
11000.4835,
#
11000.5935,
REQUIRED TOOLS:
SAFETY GLASSES
MASKING TAPE
PHILLIPS SCREW DRIVER
T-15 TORX DRIVER OR BIT
PLIERS
T-30 TORX DRIVER OR BIT
(07-09 MODELS ONLY)
Advertisement
Related Manuals for Quadratec QuadraTop
Summary of Contents for Quadratec QuadraTop
- Page 1 QuadraTop Fabric ® Replacement Soft Top Installation Manual for ’07-’18 4-Door Wrangler (JKU) Items: 11000.5035, 11000.4435, 11000.4835, 11000.5935, 11001.3624 & 11001.3724 Loss of vehicle control involves risk of death or serious injury, particularly to parts of your body not restrained within vehicle.
- Page 2 Careful attention is required to this instruction or operation but does ® generally not relate to personal injury. Damage to your Quadratec product or other property may result if you don’t follow instructions. Before You Begin Soft Top Installation:...
- Page 3 “cable style top” may have a "D" Ring installed instead making it easier to fold the top back. of a grommet. Replacement Hardware & Soft Top Accessories available at Quadratec.com Please review this set of instructions, > Complete Bow Assemblies: 11132.95XX...
- Page 4 Soft Top Installation: Fig1 Fig2 Remove Quarter Remove Bow Windows Screws Fig3 Fig4 Remove Header Corner Screws Remove Header Screws Remove 19 or 27 Screws (Model year Dependent) screws (Depending on model year). See Step 1A: Remove Existing Top Fabric Remove your existing Soft top Fabric.
- Page 5 Soft Top Installation: Fig5 Fig6 Fig7 Fig8 Step 1B: Remove Existing Top Fabric For Model Years 2007-2009 Only: Detach your old Soft Top Fabric from the Header. For Model Years 2010-2018 You will need to peel back the foam Only: You will need to peel back the and remove the two corner screws corner foam and unscrew the cable that hold a plastic mounting flange...
- Page 6 Soft Top Installation: Fig9 Fig10 Clamp Header to Windshield Step 2: Install the New Top Fabric As seen in Fig 10, drape the soft top to the Windshield Header With the old top completely removed fabric backing side up over the hood and the top header plate unscrewed and the windshield and locate the front from the lower header, raise the bow...
- Page 7 Soft Top Installation: FIG 13 Fig14 FIG 14 Step 4: Secure Top in Lower Header Fig15 FIG 15 Working from the center out, secure the top in the lower header channel with masking tape holding it in place for installing the top plate to the lower header.
- Page 8 Installation: Note: Figs 20 & 21 bows folded back to rear of vehicle. Rear corner shown. FIG 20 FIG 21 Cable Anchor Fabric Pocket fits over Header cable anchors over the two holes with Step 6: Header Corner Pockets Slip the corner pocket sewn into the top the cable facing the outside of the between the header and position the header (Fig 20 &...
- Page 9 Soft Top Installation: Year-Dependent Cable Spring Variable Steps FIG 24 FIG 25 Fig14 Fig15 FIG 26 FIG 27 Top bracket found on Cable Spring installed into Top Bracket 2010-2018 Model hardware Step 9: For ’10-’18 JKU 4-Door Vehicles For ’07-’09 JKU please skip to step 9A Securing the Cable Spring Locate the Cable spring hanging out of crimp the spring end closed so it cannot...
- Page 10 Soft Top Installation: ’07-’09 Cable Spring Steps for JKU 4 Door 07-09 Cable Style Conversion Kit FIG 28 FIG 29 Run the strap below & through sewn side of the buckle first and then back down through the end of the buckle.
- Page 11 Soft Top Installation: ’07-’09 Cable Spring Steps for JKU 4 Door Front FIG 28 FIG 32 over-door Rear extrusions over-door extrusions 07-09 Cable Style Conversion Kit FIG 33 FIG 34 Step 9B: Secure Rear Over-Door Extrusions The cable sewn into the top needs to The soft lip should be facing up and the rest inside of a “rain gutter”...
- Page 12 Soft Top Installation: ’07-’09 Cable Spring Steps for JKU 4 Door Front FIG 28 FIG 35 over-door extrusions REAR FRONT 07-09 Cable Style Conversion Kit FIG 36 FIG 37 Step 9C: Secure Front Over-Door Extrusions Locate the Front over door Extrusions your door surrounds.
- Page 13 Soft Top Installation: FIG 40 FIG 41 FIG 42 FIG 43 Step 11: Securing Top Front to Windshield With the cable spring installed, and We highly recommend that two people the rear corners hooked into the body fold down the header simultaneously. retaining channel, use two people and This will prevent possible damage to simultaneously fold the header forward.
- Page 14 Soft Top Installation: FIG 44 FIG 45 Step 12: Attach Quarter Window Zippers Attach the quarter window zippers by inches. Repeat this on the other side of starting the zipper on the quarter the vehicle. See Figs 44 & 45 window and zipping it closed 2-3 FIG 46 FIG 47...
- Page 15 Soft Top Installation: FIG 49 FIG 50 Step 14: Secure The Bottoms FIG 51 of the Quarter Windows Roll the bottom of the quarter window into the retainer channel on the vehicle and then close the quarter window zipper the rest of the way. Close up the hook and loop fasteners around the zippers.
- Page 16 Soft Top Installation: FIG 54 FIG 55 Fig14 Reinstall 4 Screws: View of Bow over Rear Window Opening Step 16: Reinstall Rear Bow Screws Fig15 Reinstall the 4 screws on Bow #3 over FIG 56 rear window opening. These screws were previously removed from the origi- nal top.
- Page 17 Soft Top Installation: FIG 59 FIG 60 FIG 61 FIG 62 Step 18: Prepare Rear Window Locate the rear window and place it on After sliding the retainer all the way a soft surface with the backing side up. through the “C” Channel, roll the tail- Take the factory bar removed in step gate bar into the mounts with the out- one and orient the “C“...
- Page 18 Soft Top Installation: FIG 63 FIG 64 FIG 65 FIG 66 Step 19: Secure Rear Windows Secure the rear window zippers by If the zippers have too much distance pulling the two zipper sliders all the between the window and the top, slide way down as far as possible in order to the rear corners around towards the catch the sliders on the zipper pin.
- Page 19 Care and Maintenance: Your QuadraTop is made of the finest first and test zipper. If the zipper contin- materials available but to keep it look- ues to remain open squeeze more firmly ing new and for the maximum possible with pliers and try the zipper again.
- Page 20 This Limited Warranty is the only warranty made Limited Warranty. Customers requesting warranty in connection with purchase. Quadratec neither consideration on QuadraTop soft top should first assumes nor authorizes any vendor, retailer or contact Quadratec to obtain a RGA number other person or entity to assume for it any other (610-701-3336).
Need help?
Do you have a question about the QuadraTop and is the answer not in the manual?
Questions and answers