Pioneer XY Series Installation Manual page 7

2 Accessories
__________________________________________________________________________________________________________
Table 2-1. Full-range loudspeaker
Hardware
standby
Accessories
List
Setting procedure
*1 Eye bolts to be used as secondary safety feature are not included with the products.
*2 When you use any commercially available eyebolts, please use the eyebolts meeting the
following size and specification.
*3 Using the included special bolt, attachment to the bottom of XY-3B is also available.
*4 Available by using commercially polemount adapter for the speaker stand.
*5
CP-XY3DF1 also can be used as Variable Angle Bracket not only Dual Enclosure Flying Plate Set.
Special bolt included with the XY-2 for attachment to the bottom of the speaker
XY-2 includes a special bolt set for attachment to the bottom of the speaker.
Ensure to read "3.2.2 Horizontal Flying Cradle & XY-2" to attach the XY-2 to the speaker safety.
WARNING:
- When attaching the XY-2 to the speakers, do not attach it to
anywhere other than the bottom of the enclosure.
- Do not use the bolt other than special bolt included with XY-2 for
mounting to the speaker.
Part list
Item Part Name
1 M10 Special bolt
2 Spring Washer
3 Flat washer
http://pioneerproaudio.com/
Hardware
Mounting point threaded
points(*2)
Speaker Pole
/ Tripod Stand
Variable Angle CP-XY3DF1
Bracket (*1)
Dual Enclosure CP-XY3DF1
Flying Plate (*1)
Transportation CP-XY3WB1
Qty Service Part No. Note
-
1
-
1
-
1
XY-3B XY-1
9 x M10 13 x M10
threaded
points (*2)
- -
CP-XY1DF1
(*5) (*1)
CP-XY1DF1
(*5) (*1)
-
Refer to Section 3.2
Rigging and Caster setting
M10 x 41mm (P=1.5),
6mm hex socket head
shoulder bolt
M12
M12
XY-2 XY-2E
1 x M12 13 x M10
mounting threaded
point (*3) points (*2)
35 mm
polemount -
socket(*4)
-
-
-
Page 7 / 43
©2020 AlphaTheta CORPORATION