Technical Specifications - Seco Qseven Q7-C26 User Manual

Table of Contents

Advertisement

2.2 Technical Specifications

Processors
NXP i.MX 8 Family based on ARM Cortex®-A72 cores + general purpose
Cortex®-M4F processor:
-
i.MX 8QuadMax - 2x Cortex®-A72 cores + 4x Cortex®-A53 cores + 2x
Cortex®-M4F cores
-
i.MX 8QuadPlus - 1x Cortex®-A72 cores + 4x Cortex®-A53 cores + 2x
Cortex®-M4F cores
Memory
Soldered down LPDDR4-3200 memory, 64-bit interface, up to 8GB
Graphics
Integrated Graphics Processing Unit, supports 2 independent displays.
Embedded VPU, supports HW decoding of HEVC/H.265, AVC/H.264, MPEG-2,
VC-1, RV9, VP8, H.263 and MPEG4 part, HW encoding of AVC/H.264
Supports OpenGL ES 3.1, Open CL 1.2, OpenGL 3.x, DirectX 11
Video Interfaces
HDMI 2.0a / DP 1.3 or eDP 1.4 interface, supporting HDCP 2.2
Dual Channel or 2 x Single Channel 18- / 24-bit LVDS interface (1 x Single
Channel in case of eDP interface available)
Video Resolution
HDMI / DP / eDP resolution up to 4096x2160 @ 60Hz
LVDS, resolution up to 1920x1080 @ 60Hz
Mass Storage
1x SATA Gen3 interface
eMMC 5.1 drive soldered on-board, up to 64GB
SD 4-bit interface
4MB QSPI Flash soldered-on-board
PCI Express
2 x PCI-e x1 Gen3 ports
Networking
1 x Gigabit Ethernet interface
USB
4 x USB 2.0 Host Ports
1 x USB 3.0 Host Port
1 x USB 2.0 OTG port
Audio
I2S Audio interface
Serial ports
1x UART Tx/Rx/RTS/CTS
1x CAN Bus (TTL level)
Other Interfaces
CSI camera connector
2x I2C Bus
SPI interface
8 x GPI/Os
Boot select signal
Power Management Signals
Watchdog
Power supply voltage: +5V
±5% and
DC
RTC voltage: +3V_RTC
Operating System
Linux
Yocto
Android
Operating temperature:
Commercial version 0°C ÷ +60°C **.
Industrial version -40°C ÷ +85°C **.
"
Dimensions: 70 x 70 mm (2.76
x 2.76
** Measured at any point of SECO standard heatspreader for this product,
during any and all times (including start-up). Actual temperature will widely
depend on application, enclosure and/or environment. Upon customer to
consider application-specific cooling solutions for the final system to keep the
heatspreader temperature in the range indicated.
Please also check paragraph 4.1
"
)

Advertisement

Table of Contents
loading

Table of Contents