Seco Qseven Q7-C26 User Manual page 16

Suspend to RAM (typical)
Soft Off (typical)
RTC Power consumption (typical)
Please consider that power consumption is strongly dependent on the board's configuration, on number of processor cores active and from the interfaces that are
SW enabled.
2.3.2 Power Rails meanings
In all the tables contained in this manual, Power rails are named with the following meaning:
VCC: Power Supply +5VDC ±5%
VCC_5V_SB: Standby Power Supply +5VDC ±5%
VCC_RTC: 3V backup cell input. VCC_RTC is connected to a 3V backup cell for RTC operation and storage register non-volatility in the absence of system power
_RUN: Switched voltages, i.e. power rails that are active only when the board is in ACPI's S0 (Working) state. Examples: +3.3V_RUN, +5V_RUN.
_ALW: Always-on voltages, i.e. power rails that are active both in ACPI's S0 (Working), S3 (Standby) and S5 (Soft Off) state. Examples: +5V_ALW, +3.3V_ALW.
Q7-C26
Q7-C26 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 Author: A.R - Reviewed by S.R. - Copyright © 2020 SECO S.p.A
TBD
30mA
230nA
16