Seco Qseven Q7-C26 User Manual page 13

Table of Contents

2.1 Introduction

The Q7-C26 is a Q7 Rel. 2.1 compliant module with NXP i.MX 8 Applications Processors. Featuring multicore processing (Single or Dual ARM Cortex®-A72 cores

+ Quad ARM Cortex®-A53 cores + Dual general purpose Cortex®-M4 processor) and 4Kp60 HEVC decoding, it is a scalable solution designed by SECO for home

automation, transportation, digital signage and vending machines, and applicable to scenarios requiring advanced security, connectivity, multimedia and real-time

response.

The module offers a very high level of integration, both for all most common used peripherals in the ARM domain and for bus interfaces typically used in the x86

domain, like PCI-Express.

Presented in the Q7 form factor, offering the computing abilities of a standard board, with the possibilities of combining with a ready-to-use carrier board like the

SECO CQ7-A42 or customised carrier board.

For external interfacing to standard devices, a carrier board with a 230-pin MXM connector is needed. This board will implement all the routing of the interface signals

to external standard connectors, as well as the integration of other peripherals/devices not already included in Q7-C26 module.

Q7-C26

Q7-C26 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0

Table of Contents