Seco Qseven Q7-C26 User Manual page 41

active, the system immediately transitions to the S5 State (Soft Off).
3.2.20 Manufacturing signals
®
According to Qseven Standard specifications, rel. 2.1, on pin designed as MFG_NCx ( 207÷210) are carried from NXP i.MX8 processors Debug UART signals for
firmware and boot loader implementations and from STM32 Embedded Controller BOOT signal for firmware and boot loader implementations.
Pin 207 (MFG_NC0) signal
SWCLK
Q7-C26
Q7-C26 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0
Pin 208 (MFG_NC2) signal Pin 209 (MFG_NC1) signal
DUART_RXD
Author: A.R - Reviewed by S.R. - Copyright © 2020 SECO S.p.A
Pin 210 (MFG_NC3) signal
DUART_TXD SWDIO
41