Technical Specifications - Seco Qseven mQ7-C72 User Manual

2.2 Technical Specifications

Processors
NXP i.MX 8M Mini Family based on ARM
Cortex ® -M4 400MHz processor:
•
i.MX 8M Mini Quad - Full featured, 4x Cortex
•
i.MX 8M Mini Dual - Full featured, 2x Cortex
•
i.MX 8M Mini Solo - Full featured, 1x Cortex
•
i.MX 8M Mini Quad Lite - 4x Cortex
•
i.MX 8M Mini Dual Lite - 2x Cortex
•
i.MX 8M Mini Solo Lite - 1x Cortex
NXP i.MX 8M Nano Family based on ARM
purpose Cortex ® -M7 750MHz processor:
•
i.MX 8M Nano Quad - Full featured, 4x Cortex
•
i.MX 8M Nano Dual - Full featured, 2x Cortex
•
i.MX 8M Nano Solo - Full featured, 1x Cortex
•
i.MX 8M Nano Quad Lite - 4x Cortex
•
i.MX 8M Nano Dual Lite - 2x Cortex
•
i.MX 8M Nano Solo Lite - 1x Cortex
Memory
Soldered Down DDR4-2400 memory, 32-bit interface, up to 4GB (i.MX8M Mini)
Soldered Down DDR4-2400 memory, 16-bit interface, up to 2GB (i.MX8M Nano)
Graphics
i.MX 8M Mini Family of processors:
Vivante GC320 2D accelerator + GCNanoUltra 3D accelerator
OpenGL ES 2.0, OpenVG 1.1 support
Embedded VPU (not for Lite processors), supporting:
•
HW Decoding of VP9, HEVC/H.265, AVC/H.264, VP8
•
HW Encoding of AVC/H.264, VP8
i.MX 8M Nano Family of processors:
Vivante GC7000UL 2D/3D GPU
OpenGL ES 3.1, OpenCL1.2, Vulkan support
Video Interfaces
Single/Dual Channel 18/24-bit LVDS interface or eDP interface (factory
alternatives)
® Cortex ® -A53 cores + general purpose
®
-A53 cores, up to 1.8GHz
®
-A53 cores, up to 1.8GHz
® -A53 cores, up to 1.8GHz
®
-A53 cores, up to 1.8GHz, no VPU
® -A53 cores, up to1.8GHz, no VPU
®
-A53 cores, up to 1.8GHz, no VPU
® ®
Cortex -A53 cores + general
®
-A53 cores, up to1.5GHz
®
-A53 cores, up to 1.5GHz
® -A53 cores, up to 1.5GHz
®
-A53 cores, up to 1.5GHz, no VPU
®
-A53 cores, up to 1.5GHz, no VPU
®
-A53 cores, up to 1.8GHz, no VPU
** Measured at any point of SECO standard heatspreader for this product, during any
and all times (including start-up). Actual temperature will widely depend on
application, enclosure and/or environment. Upon customer to consider application-
specific cooling solutions for the final system to keep the heatspreader temperature
in the range indicated. Please also check paragraph 4.1
Video Resolution
LVDS, resolution up to 1920x1080 @ 60Hz
Mass Storage
eMMC 5.1 Drive soldered on-board, up to 64GB
SD / MMC / SDIO interface
Optional QSPI Flash for booting
PCI Express
1 x PCI-e x1 (only with i.MX 8M Mini)
Networking
1 x Gigabit Ethernet interface
Optional WiFi 802.11 a/b/g/n/ac + BT 5.0 NGFF module onboard
USB
5x USB 2.0 Host ports (i.MX 8M Mini)
4x USB 2.0 Host ports (i.MX 8M Nano)
Audio
I2S Audio interface
Serial ports
1x 4-wire UART + 1 x Debug UART
Optional CAN interface
Other Interfaces
SPI interface
Watchdog
8x GPIO
SM Bus
I2C interface
Power supply voltage: +5V and +5V
DC
Operating System: Linux (Yocto)
Operating temperature:
Commercial version 0°C ÷ +60°C **.
Industrial version -40°C ÷ +85°C **(limited to -30°C ÷ +85°C with WiFI / BT
module on board).
Dimensions: 40 x 70 mm
SB