Table of Contents
Advertisement
2.2 Technical Specifications
CPU
Intel
®
Core i7-8665UE, Quad Core @ 1.7GHz (Turbo Boost 4.4GHz) with HT, 8MB
Cache, 15W TDP (12.5W..25W cTDP)
®
Intel
Core i5-8365UE, Quad Core @ 1.6GHz (Turbo Boost 4.1GHz) with HT, 6MB
Cache, 15W TDP (12.5W..25W cTDP)
®
Intel
Core i3-8145UE, Dual Core @ 2.2GHz (Turbo Boost 3.9GHz) with HT, 4MB
Cache, 15W TDP (12.5W..25W cTDP)
®
®
Intel
Celeron
4305UE, Dual Core @ 2.0GHz, 2MB Cache, 15W TDP
Memory
Two DDR4 SO-DIMM Slots supporting DDR4-2400 (non-ECC)
Graphics
Intel
®
UHD Graphics 620(Core processors), 610 (Celeron processors)
Up to 3 independent displays supported
®
DirectX
12, OpenGL 4.5, and OpenCL 2.1 support
HW accelerated video decode MPEG2, VC1 / WMV9, AVC / H.264, VP8, JPEG / MJPEG,
HEVC / H.265 (8-/10- bit), VP9
HW accelerated video encode MPEG2, AVC / H.264, VP8, JPEG, HEVC / H.265, VP9
Video Interfaces
Up to 2 x Digital Display Interfaces (DDIs), supporting DP1.2, eDP 1.4, DVI and HDMI 1.4
eDP 1.4 or 18/24 bit single/dual channel LVDS interface
Optional VGA interface, alternative to the second DDI interface
Video Resolutions
eDP, DP:
up to 4096x2304 @60Hz
HDMI:
up to 4096x2160 @30/24Hz
LVDS:
up to 1920x1200 @ 60Hz
VGA:
up to 2048x1536 @ 50Hz (reduced blanking)
Mass Storage
Optional eMMC 5.1 drive on-board
Up to 3 x S-ATA Gen3 channels
microSD card slot on-board
USB
8 x USB 2.0 Host Ports
4 x USB 3.1 Host ports
Networking
Gigabit Ethernet interface
Intel
®
I219-LM GbE Controller
Audio
HD Audio interface
PCI Express
Up to 8 x PCI-e x1 Gen3 lanes
Optional PCI Express Graphics (PEG) Gen3 x2 or x4 interface
Serial Ports
2 x serial ports (Tx/Rx only, TTL interface)
Other Interfaces
SPI
I2C
SM Bus
LPC bus
FAN management
4 x GPI, 4 x GPO
LID# / SLEEP# / PWRBTN#, Watchdog
Optional TPM 2.0 on-board
Power supply voltage: +12V
± 10% and + 5V
DC
Operating temperature:
0°C ÷ +60°C (commercial version) **
"
"
Dimensions: 95 x 95 mm (3.74
x 3.74
)
** Temperatures indicated (minimum and maximum) are those measured at any point
of SECO standard heat-spreader for this product, during any and all times (including
start-up). Actual temperature will widely depend on application, enclosure and/or
environment. Upon customer to consider application-specific cooling solutions for the
final system to keep the heat-spreader temperature in the range indicated. Please also
check paragraph 4.1
(optional)
SB
Advertisement
Table of Contents
