Technical Solution - Mitel Rack PDM Charger Installation And Operation Manual

Rack PDM Charger
Installation and Operation Manual
Modifications
Changes or modifications to the equipment not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.

1.5 TECHNICAL SOLUTION

The following functionality is provided by the Rack PDM Charger:
Charger functionality
- Charging of the handset battery.
- Provide a means for software and parameter update of handsets.
When using an Ethernet connection, it is possible to connect several Rack PDM
Chargers serially to the LAN.
If the Rack PDM Charger is connected to a PDM via both USB and Ethernet, the USB
connection has higher priority.
NOTE: If the Ethernet connection is used, each Rack PDM Charger needs an IP
address.
See label for MAC address.
The Rack PDM Charger is equipped with a combined reset button and embedded LED
on the front.
1.6 INTERFACES
NOTE: The requirements stated below are only applicable for the Rack PDM Charger.
Computer:
• Microsoft Windows XP
7® Professional (32-bit/64-bit), Windows 7® Enterprise (32-bit/ 64-bit), Windows 7®
Ultimate (32-bit/64-bit)
• Sun Java Runtime Environment (JRE) version 6 or higher.
• USB port. USB 1.1 required, USB 2.0 supported.
• Ethernet port 10/100 Mbit/s.
21/1531-ANF 901 43 F 2017-04-25
®
Professional, Service Pack 2 (SP2) (32-bit), or Windows
6