Table of Contents
Advertisement
Rack PDM Charger
Installation and Operation Manual
Table 1. Wiring color codes.
IEC
Brown
Blue
Gr/Ye ** Green
The "Old" standard was used in various countries (including Australia), and
*
some wiring may still use these colors.
Gr/Ye - Green with Yellow stripe - this is the standard world wide, although it is
**
not common in the US or Canada at present.
***
There is an important distinction between "Grounding conductor" (safety earth)
and "Grounded conductor" (Neutral). These are US terms for the conductors
and they are not interchangeable, despite the similarity of the names !
Installation of Additional Units in a Serial Power Configuration
NOTE: Do not connect more than five units in a power series. Serial power
configuration is only allowed for wall mounted Rack PDM Chargers, it is not
allowed for Rack PDM Chargers used as a single desktop unit placed on a table.
NOTE: Do not connect more than four units to one single LAN outlet in a LAN series.
IMPORTANT: It is not allowed to connect additional Rack PDM Chargers or Battery
IMPORTANT: Disconnect the power supply connection before working on the units.
1
If the additional Rack PDM Charger has not yet been mounted on the wall, do
this according to
2
Open the top cover of the Rack PDM Charger closer to the AC power source.
3
Remove the cover which protects the unused AC output terminal block of the
charger closer to the AC power source.
4
Mount the cable support holder at the unused opening in the charger closer to
the AC power source. The cable support holder is provided in the parts bag. See
figure
21/1531-ANF 901 43 F 2017-04-25
US
Old *
Load
Black
Red
Active
White
Black
Neutral Return, Cold, Grounded connector
Green
Earth
Pack Chargers if the chargers are connected to the power supply via an
AC plug.
figure 4
on page 9.
8.
Also called
Line, Hot
Ground, Safety Earth, Earth Ground,
Grounding conductor ***
12
Advertisement
Table of Contents
