Table of Contents
Advertisement
Installation and Operation Manual
Desk PDM Charger
1.1 ABBREVIATIONS AND GLOSSARY
device
DHCP
Easy replacement
WinPDM
USB
CPDM3
1.2 SAFETY
The desktop charger adapter shall be connected to 100 - 240 V AC, 50 - 60 Hz.
Therefore extra caution shall be taken during operation. The Desktop Charger itself is
supplied with 5 V DC from the adapter.
IMPORTANT: Use only the power supply adapter delivered with the charger. Replacing
with other power supply units means risk of battery explosion caused by too high input
voltage or switched polarity. Supplying the charger with 5 V on opposite poles than
intended is strongly forbidden.
1.3 TECHNICAL SOLUTION
The following functionality is provided by the Desk PDM Charger:
•
Provide a means for software and parameter update of handsets and chargers.
•
Charging of the battery of the handset.
•
Easy replacement
The Desk PDM Charger has one USB connection and two Ethernet connections. When
using Ethernet connection it is possible to connect several Desk PDM Chargers serially
to the LAN.
If the Desk PDM Charger is connected towards WinPDM via both USB and Ethernet,
the USB connection overrides the Ethernet connection.
If the Ethernet connection is used, each Desk PDM Charger needs an IP address.
See label for MAC address.
5
In this document, a device can be Desk PDM charger or a
handset developed to work together with Desk PDM
Charger and WinPDM/CPDM3. See respective manual for
each device.
Dynamic Host Configuration Protocol, protocol for
automating the configuration of computers that use TCP/IP
A handset replacement procedure that is done via the
handset display and does not involve the WinPDM/
CPDM3.
Windows Portable Device Manager
Universal Serial Bus
Centralized Portable Device Manager:
A system version with more features than the WinPDM. It
runs on a ELISE3 hardware and is manageable from a pc
with network communication.
20/1531-ANF 901 43 D 2017-03-22
Advertisement
Table of Contents
