Table of Contents
Advertisement
Rack PDM Charger
Installation and Operation Manual
Figure 6. Examples of how Rack PDM Chargers can be mounted and connected by
fixed installation to a power source.
Opening the Top Cover
Open the top cover by first pressing on the sides of the top cover, then lifting it
upwards.
Figure 7. Opening the top cover of the Rack PDM Charger.
Fixed Installation in Detail
Fixed installation of the first charger or single unit with fixed electrical installation.
1
Remove the C14 connector from the power cord. Measure, cut and strip the
power cord to be connected to the disconnect device.
2
Connect the mains power supply cord to the disconnect device.
The IEC color code is used in the power cord supplied.
21/1531-ANF 901 43 F 2017-04-25
11
Advertisement
Table of Contents
